Special Purpose Cleaning Machines
Special Purpose cleaning machines are required for non-standard cleaning applications. The
components or the cleaning requirement can be critical. We have developed many such machines
for critical applications. Some of the examples are given below.
- Bin Washing Machine/ Plastic Crate Washing Machine
Master Handlers Bin Washing Machine/ Plastic Crate Washing Machine enables customers to
handle the whole crates washing process efficiently and with a high continuous output as much
as 400 crates per hour. Loose burrs, unguent, lubricated and other contaminants are kept on
machinery following with machining, forging, heat treatment and other processes that are
efficiently cleans contamination. Our bin washing machine is perfect solution for this type of
crate washer application.
- Crankshaft Cleaning machines
A crankshaft is a shaft driven by a crank mechanism, consisting of a series of cranks and
crankpins to which the connecting rods of an engine are attached. It is a mechanical part able to
perform a conversion between reciprocating motion and rotational motion which is lubricate and
requires cleaning for wear and tear. Thus High pressure (> 350 bar pressure) cleaning machine
with vacuum drying for specific cleaning of cross-holes in the component such as crankshaft.
- Tube Cleaning Machine
Tube cleaning describes the activity of, or device for, the cleaning and maintenance of fouled
tubes. Tube cleaning machine here is for specifically efficient cleaning of the ID of tubes and
- Fuel Pipes Cleaning Machine
Cleaning fuel pipes is a service frequently recommended by repair shops. But unless there are
noticeable signs of clogged fuel injectors (such as a rough idle, stalling, poor acceleration or high
emissions levels), it might not be necessary. There are dedicated machine for inner and outer
cleaning Fuel Pipes of various different shapes and geometry. Fuel Pipes Cleaning machines are
specifically for cleaning of the ID of tubes and pipes.
- Camshaft cleaning machine
If the vehicle idles roughly, stalls frequently, has a drop in engine power, stumbles frequently,
has reduced gas mileage, or accelerates slowly, these are all signs your camshaft position sensor
could be failing, might needs cleaning. Thus Camshaft Cleaning machine are for precise cleaning
of the camshaft bores and the cross oil hole.
- Crown wheel and Pinion Cleaning Machine
A crown and a pinion is a gearing mechanism which is used to get high torque. A crown and
pinion gear set is used for the same purpose as a ring and pinion, to change the direction of
rotation, usually at a right angle. It is also used to reduce the speed of rotation, how much is
determined by the actual gear sets used. Due to its high work mechanism its wear and tear has to
be frequent. Thus crown wheel & cleaning machine is used for cleaning the abrasive lapping
Copyright 2020, All Rights Reserved